You are here

Integrations

Azure - Load Balancers

Requires Opsview Monitor 6.x
check_circle
Opsview Supported

404: Not Found

Cloud - Azure - Load Balancers Opspack

Azure Load Balancers allow you to scale applications, providing your services with high availability. They support TCP and UDP applications for both inbound and outbound scenarios with high throughput/low latency. Load Balancers contain frontend and backend pools instances which balance traffic according to health probes and Load Balancer Rules which you can define. Public Load Balancers can also allow your Virtual Machines to possess outbound connections by translating private IP addresses to public IP addresses.

What You Can Monitor

This Opspack allows you to monitor all the metrics you need to efficiently run Load Balancers on Microsoft Azure. After installation, you'll be able to check your endpoint availability, as well as monitor packet and bytes transmission accurately.

Service Checks

Host Template Service Check Description
Cloud - Azure - Load Balancers Azure - LB - Endpoint Availability Availability of VIP (Virtual IP) and DIP (Dynamic IP) endpoints, based on probe results [Timespan = 5mins, Granularity = 5mins]
Cloud - Azure - Load Balancers Azure - LB - Packets Transmitted Total number of Packets/SYN Packets transmitted within time period [Timespan = 5mins, Granularity = 5mins]
Cloud - Azure - Load Balancers Azure - LB - Bytes Count Total number of Bytes transmitted within time period [Timespan = 5mins, Granularity = 5mins]

Prerequisites

  • Ensure your Opsview Monitor version is newer than 07 September 2018. Check Opsview Release Notes for the latest version of Opsview Monitor.

Setup Azure for Monitoring

To monitor your Azure environment, you need to configure it for monitoring. This requires Administrator access on Azure. You need to retrieve the following credentials:

  • Subscription ID
  • Tenant/Directory ID
  • Client/Application ID
  • Secret Key

Step 1: Find Subscription ID

The Subscription ID can be found in the Subscriptions section under the All services section from the Azure dashboard.

Find Azure Subscription ID

Find Azure Subscription ID

Step 2 : Find the Tenant/Directory ID

The Tenant/Directory ID can be found in the Azure Active Directory under the Properties section from the Azure dashboard.

Find Azure Tenant/Directory ID

Step 3: Find the Client/Application ID for your application

You need to create and register your application if you haven't already. Use the following documentation from Microsoft: Create an Azure Active Directory application

The Client/Application ID can be found in Azure Active Directory under the App registrations section from the Azure dashboard.

Find Azure Client/Application ID

Step 4: Generate the Secret Key for your application

You will need to create a Secret Key for your application, once this has been created its value will be hidden so save the value during creation.

To create the Secret Key, select your application from the list, select the Settings within your application and then select the Keys option.

There you can create a new key by adding the description and expiration period and the value will be generated.

Create Secret Key

Step 5: Provide access to the subscription you wish to monitor

Navigate to the Subscriptions section and select the Subscription you selected before.

In the Subscription to be monitored, click Access Control (IAM).

Then click the Add button, select the required role and select the application, once for each of the following roles: * Reader

Add Subscription to Application

Add Subscription to Application

If you are running more than one subscription these steps will need to be done for each one you wish to monitor.

Setup and Configuration

To configure and utilize this Opspack, you simply need to add the 'Cloud - Azure - Load Balancers' Opspack to your Opsview Monitor system.

Step 1: Import the Opspack

Download the cloud-azure-load-balancers.opspack file from the Releases section of this repository. Navigate to Host Template Settings inside Opsview Monitor and select Import Opspack in the top left corner.

Add Variables

Then click Browse and select the cloud-azure-load-balancers.opspack file. Click Upload and then click Import when the file is uploaded. You may see a 'CONFLICT' warning message after uploading - this is because all 'Cloud - Azure' Opspacks utilize the same variable (AZURE_CREDENTIALS) for authorizing access to your resources. Just click Overwrite and the Opspack should import successfully.

Add Variables

Step 2: Add the host template

Add the relevant host template (as listed in the Service Checks table above). If this is a resource that is applicable for a host check (has a valid hostname or IP) then you can fill in the Primary Hostname/IP field with this, and then open the Advanced section at the bottom and change the Host Check Command type to TCP Port 80 (HTTP). If the resource has no hostname or public IP, then change Host Check Command to Always assumed to be UP.

Add Host Template

Step 3: Add and configure variables required for this host

Add 'AZURE_CREDENTIALS' to the host, then override the Subscription ID, Client ID, Secret Key and Tenant ID to match the values retrieved earlier.

Add Variables

Depending on your host template, you will require different additional variables declared as specified below:

Host Template Variables Required
Cloud - Azure - Load Balancers AZURE_RESOURCE_DETAILS

These can be filled out as follows:

AZURE_RESOURCE_DETAILS:

Add Variables

Step 4: Reload and the system will now be monitored

View Output

v2.1-opsview-6

ODI-1747 Fixes and Improvements to Authentication Process

Improvements to Azure authentication error handling

v2.0-opsview-6

ODI-1453 Initial Release of Azure Opspacks for Opsview Monitor 6.0

Initial release of Opspack to work with Opsview Monitor 6.0