You are here
NTP Monitoring
Requires Opsview 6
check_circle
Opsview Supported
NTP Opspack
Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks. In operation since before 1985, NTP is one of the oldest Internet protocols in current use.
Service Checks
| Service Check | Description |
|---|---|
| NTP | Checks if the port is open and working |
Setup and Configuration
To configure and utilize this Opspack, you simply need to add the 'Network Services - NTP' Opspack to your Opsview Monitor system.
Step 1: Add the Host Template
Add the Network Services - NTP Host Template to your Opsview Monitor host.
For more information, refer to Opsview Knowledge Center - Adding Host Templates to Hosts.
Step 2: Apply changes and the system will now be monitored
