You are here

Blog

Monitoring Cisco devices - Useful SNMP OIDs

Monitoring load average

1 minute load average:    .1.3.6.1.4.1.9.2.1.57.0
5 minute load average:    .1.3.6.1.4.1.9.2.1.58.0

These return an integer corresponding to the % load average over 1 or 5 minutes

Monitoring memory usage

5 min memory used:           .1.3.6.1.4.1.9.9.48.1.1.1.5.1   
5 min memory free:            .1.3.6.1.4.1.9.9.48.1.1.1.6.1

These return an integer corresponding to memory in bytes based on a 5 minute average

Monitoring temperature

Temperature state:     .1.3.6.1.4.1.9.9.13.1.3.1.6.1

Some devices such as 3600 series Routers only return a temperature state

Results correspond to the following states:

1               normal
2               warning
3               critical
4               shutdown
5               not present

Inlet temperature:          .1.3.6.1.4.1.9.9.13.1.3.1.3.1
Outlet temperature:        .1.3.6.1.4.1.9.9.13.1.3.1.3.3

Get unified insight into your IT operations with Opsview Monitor

webteam's picture
by Opsview Team,
Administrator
Opsview is passionately focused on monitoring that enables DevOps teams to deliver smarter business services, faster.

More like this

Aug 16, 2016
Blog
By David Chatterton, Customer Success Engineer

A guide on how to monitor Juniper EX switches using SNMP and Opsview. 

Feb 05, 2016
Whitepapers
By Opsview Team, Administrator

At Opsview, like in many other IT monitoring and Application Performance Management companies, we like to talk about the next generation of...

Aug 19, 2015
Blog
By Adam Such, Integrations Lead

This guide shows you how to run an SNMP walk in Opsview.