You are here

Interface GigabitEthernet1/0/1 (GigabitEthernet1/0/1 Interface) is DOWN (admin status is UP)!

3 posts / 0 new
Last post
cteneyck
cteneyck's picture
Interface GigabitEthernet1/0/1 (GigabitEthernet1/0/1 Interface) is DOWN (admin status is UP)!

Is there any way to not report this as a critical error? I really don't want to go through all my switches and administratively turn off ports. 

 

Thanks in advance,

 

-Cris

smarsh
smarsh's picture
Hi Cris,

Hi Cris,

Go to the SNMP tab of the switch, click 'submit and edit host interfaces' and untick Giga 1/0/1, for example.

HTH,

Sam

cteneyck
cteneyck's picture
I still want to monitor the

I still want to monitor the host interface. I just don't want to catagorize this as a critical error. I would rather it show up as OK being that the onlything wrong is that the port is not in use or the device connected is powered down. I am using the check snmp interfaces cascade plugin.