You are here

Monitoring Multiple processes with one check

3 posts / 0 new
Last post
patrick.roughan_85783
patrick.roughan_85783's picture
Monitoring Multiple processes with one check

Hey,

I want to monitor multiple processes with one check, like the disk check in which you add the partitions (linux system) to the attributes in the host configuration and the disk check then run for all the partitions. I have tried to use the check_proc command to do the same with the processes attribute in host configure and it works but only for the first processes attribute, all after are ignored. Is there another check that can be used for this?

current check used.

check_nrpe -H $HOSTADDRESS$ -c check_procs -a '-C %PROCESSES% -c 1:1' 

smarsh
smarsh's picture
Edit the service check, go to

Edit the service check, go to the 'Advanced' tab and there is a drop down called 'Multiple Service Checks'. Choose PROCS there, and it'll work as you expect :)

patrick.roughan_85783
patrick.roughan_85783's picture
fixed

Great, thanks for your help. I tested that out and it worked. Thanks again