You are here

Using Netaudit (rancid) to pull config from HP switch

2 posts / 0 new
Last post
csterley
csterley's picture
Using Netaudit (rancid) to pull config from HP switch

When configuring the device and hitting the test button im getting the following:

Unknown option: t

10 clogin error: Error: no password for 10 in -.

10: missed cmd(s): show stack,show system-information,show version,write term,show flash,show system information,show module

10: End of run not found

;

Have cisco gear that is working without issue.

csterley
csterley's picture
When running manually from

When running manually from the command line i get the following:

nagios@ops-si:/opt/opsview/rancid/bin$ ./run_rancid_collect

Starting at Wed Sep 20 14:39:15 EDT 2017

Created lockfile /var/opt/opsview/rancid/lock/run_rancid_collect.lock

192.168.100.1 clogin error: Error: no password for 192.168.100.1 in -.

192.168.100.1: missed cmd(s): show stack,show system information,show module,show system-information,write term,show flash,show version

192.168.100.1: End of run not found