You are here

Switch monitoring exclude Discards and Errors

3 posts / 0 new
Last post
gspanner
gspanner's picture
Switch monitoring exclude Discards and Errors

Hi all,

Can anyone offer me advice on how to monitor a switch but only show the status of the ports as up \ down? I have the switch reporting back with the following config:

Monitors:
Network Base - Connectivity LAN
Network - SNMP - MIB-II: Interface, Interface Poller, Interface Status and Uptime

Under SNMP and Host Interfaces I have just selected all of the ports and even raised the warning and criteria levels but all this does is report back that everything is OK with the Discards and Errors. I really need a list of just the ports and their current status.

Any help would be appreciated.

 

TIA,

awijntje
awijntje's picture
Re: Switch monitoring exclude Discards and Errors

he there,

well if you don't want the errors and discard (and you are not using the Network SNMP MIB II on anything else) you could simpley remove those to servicechecks from the template.

Go to settings -> host-templates, select Network SNMP MIB II and on the monitors tab remove the errors and discards.

hope this helps,

Alan

gspanner
gspanner's picture
Re: Switch monitoring exclude Discards and Errors

Thanks Alan, that has pretty much got what I need so appreciate your help.

Greg