You are here

How to monitor a service

2 posts / 0 new
Last post
admin_titeca's picture
How to monitor a service


How do I monitor the service Citrix Encryption Service?

Service name: Citrix Encryption Service

-H $HOSTADDRESS$ c nsc_checkservicesate -a 'ShowAll=long "Citrix Encryption Service"=started'

Then I get the error: CRITICAL: Citrix Encryption Service": not fond (critical)


Thanks in advance,


awijntje's picture
Re: How to monitor a service

he there,

have a look at:

this shows some examples on how you should configure these kind of checks.

Having said that, I do knwo from experience that the service name is not the same as the name you see in MMC-services (sometimes they differ quite a bit).

Best would be to use something like scquery (from the commandline) and verify that the service name is correct.

hope this helps,