You are here

How do I monitor my Areca RAID card?

2 posts / 0 new
Last post
Hitman247m's picture
How do I monitor my Areca RAID card?

Hi everyone,

My setup is as follows:

  • OpsVIew Core, virtual appliance.
    • IP:
  • Areca Arc-1882 RAID card
    • IP:
    • The card is currently being managed out-of-band via the ethernet port on the card.
    • Both the CLI and web interface are functional.
    • I believe I have set up the SNMP settings correctly on the card.

My problem is that none of the items in the event log on the RAID card how up in OpsView.

I've attached some screenshots of my settings.


I hope someone is able to help me.

-- Hitman

awijntje's picture
Re: How do I monitor my Areca RAID card?

he there,

for one Opsview Core does not have an snmptrap reciever (this is included in Opsview Pro though).

So sending snmptraps will not work.

You might want to have a look at some of these plugins you can use for monitoring RAID cards:

hope this helps,