You are here

Hyper-V virtual appliance not working

5 posts / 0 new
Last post
demetri
demetri's picture
Hyper-V virtual appliance not working

Just started up the virtual appliance of Atom with Hyper-V. Starts up and runs but I get an error when trying to get to the web interface (port 80)

Error: Opsview is not running or is not responding to requests.

I was able to log into webmin fine (port 10000). Any ideas?

Duncan Ferguson
dferguson's picture
Can you please post the

Can you please post the output from running

/opt/opsview/watchdog/bin/opsview-monit summary

and

/opt/opsview/watchdog/bin/opsview-monit start all

  Duncs

demetri
demetri's picture
All of the processes were

All of the processes were running except "opsviewfnd" and "import_ndconfigend". After starting them, "import_ndconfigend" is now running, "opsviewfnd" is still not running. I went to the web interface and it asked me to enter the activation key, I did, and now its stuck on activating.

demetri
demetri's picture
After activating I got the

After activating I got the same error as before. Refreshing the page, I'm back at the activation screen and it wants me to enter the code. I did strangely enough get an e-mail saying "Congratulations! You are up and running"

demetri
demetri's picture
Ok, I tried a 3rd time to

Ok, I tried a 3rd time to activate, and this time it went through, I got a green thumbs up, and was then redirected to a login page.