You are here

dashboard - feature requests

3 posts / 0 new
Last post
pru
pru's picture
dashboard - feature requests

dashboard

- share readonly without credentials to view from client (raspberrypi, screen at the wall)

 

Host Group Tree View

[_]All

      [_] Some

      [_] Next

      [_] Other

 

-> you can only select all or one. i would like to select two groups

 

Network Map

i can zoom with the mousewheel, so all the space is nice used. But these zoom settings aren't saved.

 

Performance Graph (less important to me)

- set axes values

- shows me sometimes values with decimal digits like 37,9 where only  integer values are possible

- color change with values would be nice (like orange > 200, red >500)

 

 

i like the dashboard, great work!

Greetings & thanks

Philipp

 

pru
pru's picture
Re: dashboard - feature requests

also in the event-table in dashboard i want the possability to filter like this:

[_]All

      [X] server

      [X] server hosts

      [_] switches

 

-> you can only select all or one. i would like to select two groups

right now i added 102 switches with SNMP Trap... no i can see all the Trap Messages, but nothing else.

 

looks like this.

ip1 :: SNMP Trap - Alert on trap is Ok

ip1 :: SNMP Trap - Link State is Ok

ip2 :: SNMP Trap - Alert on trap is Ok

ip2 :: SNMP Trap - Link State is Ok

ip3 :: SNMP Trap - Alert on trap is Ok

ip3 :: SNMP Trap - Link State is Ok

ip4 :: SNMP Trap - Alert on trap is Ok

ip4 :: SNMP Trap - Link State is Ok

ip5 :: SNMP Trap - Alert on trap is Ok

ip5 :: SNMP Trap - Link State is Ok

ip6 :: SNMP Trap - Alert on trap is Ok

ip6 :: SNMP Trap - Link State is Ok

wiwi@ksz.ch
wiwi@ksz.ch's picture
same again

this issue still exists for me.

can anybody reply please.

thanks

philipp